On this page
A business that sells, installs and services something for households, such as garage doors, blinds and shutters, solar, pools, air conditioning, security, pest control, cleaning or home maintenance, runs the same chain on almost every job. An enquiry comes in, someone visits to measure or inspect, a quote goes out, the customer signs and pays a deposit, an order goes to the factory or supplier, the job is installed and invoiced, and then come years of servicing and warranty. The CRM holds the leads and quotes, a job management system holds the schedule, the supplier’s portal holds the order and the accounting system holds the invoices. A sales and contract administrator sits between them, keying enquiries, preparing quotes and contracts, placing orders and chasing customers, suppliers and installers. We build around your existing systems rather than replace them. Automation takes the predictable steps between those systems and runs them as fixed, tested software that applies your prices, options and rules the same way every time. AI is used only where something has to be read, such as a customer’s email, a sales consultant’s measure notes or a supplier’s order confirmation, and its output is checked before anything goes to a customer or a supplier.
Your process gets its own map in the assessment.
From enquiry to measure and quote
Enquiries arrive from the website form, a quote request on a comparison or trade directory site, a phone call, a showroom visit or a referral from a builder, and each one is typed into the CRM by whoever picks it up. Some are logged twice, some not at all, and the time between the enquiry and the first call decides a lot of sales. AI reads each email and form for the customer’s details, the suburb, the product and what they have asked for, and drafts the CRM record. Fixed rules then check for an existing customer or open quote, assign the lead to the right consultant by area and product, and offer measure or site visit times from the consultant’s calendar. After the visit, the consultant’s sizes, photos and notes come back from a tablet or a phone. AI reads the notes into quote lines, and the pricing underneath comes from your price list, option rules, install allowances and margins, applied the same way every time. The consultant checks every line and approves every quote before it is sent, and anything unusual, such as an out-of-square opening, a steep roof or an access problem, stays with them to price. Once a quote is out, a follow-up schedule chases it at the intervals you set and tells the consultant when a customer has opened it or gone quiet.
Signed quotes into contracts, deposits and factory orders
A won quote creates most of the paperwork. The contract has to be prepared with the right terms, the deposit invoiced and chased, and the order placed with the factory or supplier, often by retyping every size, colour, motor, track and accessory into a portal or an order form. A wrong digit means a door, a blind or a panel made to the wrong size, and the error is usually found on install day. All of this follows rules, so it runs as fixed software. The contract is drawn from the accepted quote and your standard terms, the deposit invoice is raised and its payment tracked, and the order is built from the quoted specification in the format each supplier needs. Where a sale may be an unsolicited consumer agreement under the Australian Consumer Law, such as one agreed in the customer’s home, the rules you set hold the deposit and the order until the cooling-off period has passed. Whether a sale falls under those rules is decided by your people and your advisers, not by the software. AI reads the supplier’s order confirmation and compares it with what was ordered. The contract administrator releases each order, and any difference in size, option, price or delivery date goes to them to resolve before anything is made.
Installs and getting paid
An install can only be booked once the product is in stock or due from the factory, the right installer is free, and the customer can be home. The scheduler works from a whiteboard or the job system, rings the customer, and rings again when the delivery slips. Most of this follows rules, so it runs as fixed software. Jobs become ready to book when the supplier confirms dispatch, available slots are offered by installer, skills and area, and confirmations and reminders go to the customer by text and email with what to expect on the day. AI reads supplier emails about changed delivery dates and flags the jobs they affect. The scheduler decides how a clash or a delay is handled and who calls the customer, and a customer who replies with a question or a complaint goes to a person.
Solar, air conditioning, pools and larger security or door jobs are often paid through a finance provider or a buy-now-pay-later plan, and each application has its own portal, status emails and conditions. Someone checks every morning which applications are approved, which are waiting on documents and which have lapsed, then matches the approval to the job before the order can go ahead. Tracking the status and holding the order until approval is confirmed are rule work, so they run as fixed software. AI reads the provider’s approval and conditions emails and links them to the right job. The provider assesses and decides each application, and the software gives no advice about credit. Any question from the customer about eligibility or terms goes to a person, who refers it to the provider.
When the installer finishes, the job sheet, photos, the customer’s signature and any extra items or variations have to reach the office before the final invoice can go out. Often they arrive days later, in a text or a photo of a paper docket, and the balance waits. Fixed software builds the final invoice from the contract, the deposit already paid and any approved variations recorded on the job, sends it with the completion documents and warranty details, and follows up overdue balances at the stages you set. AI reads the installer’s notes for extra work or items left unfinished. The contract administrator approves any variation before it is invoiced, and a job marked incomplete or disputed goes to them, not to the customer.
Service, warranty and the customer
Garage door services, air conditioning cleans, pool maintenance, annual pest treatments, alarm monitoring and solar panel checks all bring the customer back each year, if someone remembers to ask. The list usually sits in a spreadsheet or a CRM report that nobody runs. Renewals follow rules, so they run as fixed software. Customers due for a service or a plan renewal are contacted at the intervals you set, booked into available slots, and invoiced or charged on the terms they agreed. AI reads replies that do not fit a simple yes or no, such as a request to move the date or a mention of a new fault. Any price change is approved by a manager before it is sent, and a customer who wants to cancel goes to a person.
A customer reports that a motor has stopped, a blind will not retract, an inverter shows a fault or a pump is leaking. Someone finds the original job, checks the install date, the product, the serial number and the warranty terms, books a technician, and then claims the part or the labour back from the manufacturer on its own form. Finding the job, checking the dates against your warranty and the manufacturer’s, and preparing the claim back to the manufacturer are rule work, so they run as fixed software. AI reads the customer’s description, photos and the technician’s report and drafts the claim. Whether a fault is covered, under your warranty, the manufacturer’s or the consumer guarantees in the Australian Consumer Law, and what remedy the customer is offered, is decided by a person in your service team.
After a job, the business wants a review, and an unhappy customer needs to be heard before they post one. Requests go out by hand when someone thinks of it, and a complaint can sit in a sales consultant’s inbox for a week. Fixed software sends a feedback and review request after every completed job on the same rule, whether or not the job went smoothly, and records the response against the job. AI reads each response and each incoming email for signs of a complaint and sorts it by product, installer and issue. Every complaint goes to the service manager, who decides how it is handled and what is offered, and the record of each complaint and its outcome stays against the job.
Suppliers, technicians and the office
Factory and supplier invoices arrive by email, sometimes one per job and sometimes as a monthly statement covering dozens of orders, and accounts payable matches each one to the order and the job before it is paid. Prices change, freight appears, and a remake for a wrong size has to be charged to the right party. Capturing the invoice is well served by packaged tools, and where you already use one we take its output. The matching after capture is rule work. Each line is checked against the order, the agreed price and the job within the tolerances you set, the cost is coded to the job, and mismatches go to the person who placed the order. AI reads only the invoices the capture tool cannot. The accounts officer approves payment, and any remake or credit dispute goes to the contract administrator.
Installers and technicians record their hours on a phone app, a paper sheet or not at all, and payroll and job costing both depend on those hours being right. Someone checks each timesheet against the jobs on the schedule, chases what is missing and keys the hours into payroll. Comparing hours with the scheduled and completed jobs, applying your award and allowance rules as you have set them, and posting labour to each job run as fixed software. AI reads free-text notes for travel, waiting time or extra work. The operations manager approves the timesheets each pay period, and any difference between the hours claimed and the jobs recorded goes to them.
The sales, service and accounts inboxes hold enquiries, signed quotes, supplier confirmations, delivery notices, invoices, warranty requests and complaints, all mixed together. Someone reads each message and forwards it, and a message that waits can mean a lost sale, a missed install date or an angry customer. AI classifies each email and matches it to the customer, the quote, the job or the supplier order. Fixed rules then route it to the right person or straight into another automated process. Complaints always go to a person, and anything the classifier is unsure of goes to a review queue for a person to sort.
Retyping between the CRM, the job system, the supplier and the accounts
A customer’s details are entered in the CRM at enquiry, again on the quote, again on the supplier order, again in the job management system for the install and again in the accounting system for the invoice. A change to a size, an address or an option made in one place rarely reaches the others, so the wrong product is made, the installer goes to the wrong house, or a variation is never invoiced. Each hop looks small, so nobody measures it as one process. Almost all of it is fixed software, with field mappings between systems, a scheduled sync, reconciliation checks and an exception queue for records that do not line up. Where a supplier portal has no way to receive data, the entry stays with a person, and we prepare it so it can be checked and entered quickly. AI is used only to map free-text notes into the right field. We measure the whole chain as one process first, so the cost is visible before anything is built.
If one of these costs you real money every month, describe it in four answers.
Related industries
Check your own numbers
Free, about 3 minutes, and you see the result straight away.
Thinking about what a process actually costs you?
The assessment is small, fixed-price, and tells you the real number, whether or not you ever build.
Worth a 30-minute conversation.


